No. It is a classical ultimate-pressure estimate without code partial factors.

What about the water table?

Not included; effective stress and buoyant unit weight must be handled by the user elsewhere.

Bearing Capacity Calculator

Computes q_ult = c*Nc + q*Nq + 0.5*gamma*B*Ngamma with q = gamma*Df. Friction angle drives Nc, Nq, Ngamma through textbook correlations. Shape, depth, and inclination factors, groundwater, layered soils, and settlement are not modeled. Output is not a substitute for geotechnical investigation or design standards.

免费 · 无限制 · 浏览器内处理

如何使用

1Enter cohesion c, unit weight gamma, footing width B, embedment Df, and friction angle phi (degrees).
2Optional: factor of safety for an allowable pressure estimate.
3Read overburden q, factors, ultimate pressure, and allowable if FOS set.

常见问题

Is this LRFD or EC7?: No. It is a classical ultimate-pressure estimate without code partial factors.
What about the water table?: Not included; effective stress and buoyant unit weight must be handled by the user elsewhere.